DVI Extender |
Vigor DVI Extender DVI-1000 US$ 120.00
The repeater extends the distance between any computers supporting DVI-D monitors or projectors up to 100ft and transmits perfect digital video. If you are using a 50ft or longer DVI cable to extend a DVI display to your source, you may see sparkles when it’s connected. When connected with the DVI Extender, that same cable can sustain 1280x1024 resolution up to 100ft and 1600x1200 resolution up to 80ft.
|
|
Optical DVI Extension Module |
Opticis Optical DVI Extension Module (M1-2R2-TR) US$ 595.00
M1-2R2-TR is designed to enable the DDC/HDCP parameter control and power management interconnection through RJ-45C UTP copper cable with digital data gigabit over two duplex LC patch cord fibers up to 100m.
|
|
Opticis Optical DVI Dual Link Extension Module (M1-2R2VI-DU) US$ 1399.00
The M1-2R2VI-DU is designed to be used with high resolution Dual link DVI source and large panel display, such as 30'' apple cinema display (2,560X1,600). It performs DDC/HDCP interconnection over CAT5 with R-J45 connector and transmits Dual link DVI graphic sources over four duplex LC patch cord up to 100m.
|
|
Optical DVI Point to Point Cables |
|
|
Opticis DVI Point to Point Hybrid Cable 98ft: M1-1P0E-030 US$ 858.00
M1-1P0, is designed to adopt hybrid cables, embedded copper wires for DDC/HDCP interconnection and fibers for graphic data together in a jacket so that it offers the benefits of sturdy metallic and compact size connectors. For the simplicity of installation, it is utilized +5V DC power of graphic cards to drive both of its transmitting and receiving modules so that it doesnt require a external power adaptor. For just in case, however, its optional model to use an external power adaptor is available.
|
|
Opticis DVI Point to Point Hybrid Cable 66ft: M1-1P0E-020 US$ 660.00
M1-1P0, is designed to adopt hybrid cables, embedded copper wires for DDC/HDCP interconnection and fibers for graphic data together in a jacket so that it offers the benefits of sturdy metallic and compact size connectors. For the simplicity of installation, it is utilized +5V DC power of graphic cards to drive both of its transmitting and receiving modules so that it doesnt require a external power adaptor. For just in case, however, its optional model to use an external power adaptor is available.
|
|
|
Detachable Fiber DVI Extension |
Opticis Two-Fiber Detachable DVI Extension Module (M1-201DA) US$ 795.00
The Digital Visual Interface is a high-quality, uncompressed data link between a host processor video card and a display peripheral. DVI Optical technology for this transmission stretches the performance beyond the limitations of copper wire with longer length, data security, negligible RFI/EMI and the elimination of costly analog distribution systems. The four (4) optical data, Red, Green, Blue and clock are multiplexed and de-multiplexed through CWDM optical module. Graphic data can be extended up to 1,500 meters (4,920ft) at WUXGA resolution (1900x1200) of 60Hz vertical refresh rate over two (2) LC duplex multi-mode fibers (one set).
|
|
Opticis Four-Fiber Detachable DVI Extension Module (M1-201SA) US$ 595.00
The M1-201-SA is a high-quality, uncompressed data link between a host processor video card and a display peripheral. Optical technology for this transmission stretches the performance beyond the limitations of copper wire with longer length, data security, negligible RFI/EMI and the elimination of costly analog distribution systems. The four (4) optical data, Red, Green, Blue and clock can be extended up to 500 meters (1,640ft) over four (4) LC duplex multi-mode fibers (two sets) at WUXGA (1,920x1,200) at 60Hz vertical refresh.
|
|